Optimisation, Analysis and Control of Thermal Energy and Processing Systems
2021/2022
Prerequisite/Recommended prerequisite for participation in the module
The module is based on knowledge achieved when studying the 2nd semester on the Master of Science in Energy Engineering with specialisation in Thermal Energy and Process Engineering or similar.Content, progress and pedagogy of the module
Learning objectives
Knowledge
- Have knowledge and comprehension within how to design, optimise, control and analyse thermal energy and process engineering systems
- Have knowledge and comprehension within first principle analysis methods
Skills
- Be able to judge the usefulness of the used different scientific methods for the design, optimisation and control of thermal energy and process engineering systems
- Be able to establish and verify scientific hypotheses
- Be able to apply first principle analysis methods to complex thermo- or fluid-dynamical as well as chemical processing systems
Competences
- Be able to control the working and development process within the project theme, and be able to develop new solutions within optimisation, control, and analysis of thermal energy and process engineering systems
- Be able to show entrepreneurship to define and analyse scientific problems in the area of optimisation, control, and diagnostic analysis of thermal energy and process engineering systems, and based on that make and state the reasons for decisions made
- Be able to materialise innovative ideas within the area of optimisation, control, and analysis of thermal energy and process engineering systems
- Be able to independently continue own development in competence and specialisation
- Be able to follow more sophisticated literature, or state-of-the-art, within CFD, turbulent flow, thermal system optimisation and multiphase flow
Type of instruction
Problem based project organised work in groups. The project can be made in cooperation with external partners and the project can be a disciplinary project, a cross disciplinary project or a part of a multi-disciplinary project, where several groups from the department do different parts of a larger project.
Finally, the project can also be a part of a so-called MEGA project also in cooperation with industry, where several project groups from more departments are participating, each doing their part of the large project to find a total solution.
The project work must be documented by a scientific paper (max. 8 pages) accompanied by a project summary report. The project summary report should elaborate the project details and conclusions. The maximum length of the summary report (report without appendices) is 50 pages. For more information see semester description in Moodle.
The scientific paper will be presented at a conference arranged within the Department of Energy Technology prior to the project examination.
The project work should be based upon a thermal energy and process engineering system to which an optimisation, control or diagnostic system is to be set up. First, the system is to be modelled and different system identification methods can be applied to determine the parameters of the system. The system model is verified by simulations and data time series from either a real system or a laboratory set-up. Based on the model, the optimisation, control or diagnostic system is set up to improve the performance of the system, either with regard to power output, energy efficiency, life time extraction, fault detections etc. and the system should be implemented and verified experimentally.
Due to special technical or scientific documentation requirements, the student documents the project work in a project report, which can be prepared individually or in a group within the project theme; however the student’s special preferences for the semester must be approved by the Study Board in advance.
Extent and expected workload
Since it is a 20 ECTS project module, the work load is expected to be 600 hours for the student
Exam
Prerequisite for enrollment for the exam
- It is a pre-condition that the student has submitted a scientific article and presented the scientific article at the CES conference prior to the project examination. All group members must be present at the conference
Exams
| Name of exam | Optimisation, Analysis and Control of Thermal Energy and Processing Systems |
| Type of exam | Oral exam based on a project
The project group should orally present the project work and
scientific paper. The project group members will undergo an oral
examination with internal adjudicator, based on the scientific
paper and the project summary report. |
| ECTS | 20 |
| Assessment | 7-point grading scale |
| Type of grading | Internal examination |
| Criteria of assessment | The criteria of assessment are stated in the Examination Policies and Procedures |
Additional information
Project on 3rd semester Thermal Energy and Process Engineering.
Facts about the module
| Danish title | Optimering, analyse og regulering af termiske energi- og processystemer |
| Module code | N-EE-K3-1A |
| Module type | Project |
| Duration | 1 semester |
| Semester | Autumn
|
| ECTS | 20 |
| Language of instruction | English |
| Empty-place Scheme | Yes |
| Location of the lecture | Campus Aalborg |
| Responsible for the module |
Organisation
| Study Board | Study Board of Energy |
| Department | Department of Energy |
| Faculty | Faculty of Engineering and Science |
