High Voltage Engineering and EMI/EMC
2017/2018
Content, progress and pedagogy of the module
Learning objectives
Knowledge
- Have knowledge and comprehension within the following areas:
- Fundamentals of high voltage engineering
- Generation and measurement of High AC, DC and impulse voltages
- Non-destructive test methods in high voltage engineering
- Fundamental electrostatic field stress and dielectric breakdown
- Gaseous discharges
- Fundamentals of EMI/EMC
- EMI/EMC problems in power electronic converters
- Proper layout, layout guide
- EMI/EMC models and solutions
- EMI/EMC filters
- EMI/EMC standards
Skills
- Be able to apply theories and laboratory experiments to describe generation and measurement of high AC, DC and impulse voltages for testing high voltage equipment
- Be able to apply theories and laboratory experiments to describe non-destructive test methods for evaluating the quality and lifetime of dielectrics
- Be able to apply theories and laboratory experiments to describe electric field stresses and gaseous discharges
- Be able to identify sources of EMI/EMC problems
- Be able to estimate and/or measure the EMI of a converter
- Be able to design filters
Competences
- Independently be able to define and analyse scientific problems within the area of power system high voltage engineering and EMI/EMC
- Independently be able communicate results from power system high voltage engineering and EMI/EMC
- Independently be able to be a part of professional and interdisciplinary development work within the field of power system high voltage engineering and EMI/EMC
Type of instruction
Lectures and laboratory experiments.Extent and expected workload
Since it is a 5 ECTS course module, the work load is expected to be 150 hours for the student.
Exam
Exams
| Name of exam | High Voltage Engineering and EMI/EMC |
| Type of exam | Written examination |
| ECTS | 5 |
| Permitted aids | With certain aids, see list below
Unless otherwise stated in the course description in Moodle, it is
permitted to bring all kinds of (engineering) aids including books,
notes and advanced calculators. If the student brings a computer,
it is not permitted to have access to the Internet and the teaching
materials from Moodle must therefore be down loaded in advance on
the computer. It is emphasized that no form of electronic
communication must take place. |
| Assessment | 7-point grading scale |
| Type of grading | Internal examination |
| Criteria of assessment | As stated in the Joint Programme Regulations.
http://www.engineering.aau.dk/uddannelse/studieadministration/ |
Additional information
Examination format
Written examination with questions in both High voltage and EMI/EMC.
Facts about the module
| Danish title | Højspændingsteori og EMI/EMC |
| Module code | EN-M1-10 |
| Module type | Course |
| Duration | 1 semester |
| Semester | Autumn
|
| ECTS | 5 |
| Empty-place Scheme | Yes |
| Location of the lecture | Campus Aalborg |
| Responsible for the module |
Organisation
| Study Board | Study Board of Energy |
| Department | Department of Energy Technology |
| Faculty | Faculty of Engineering and Science |
